Table of Contents
Advertisement
6.4 STORAGE
When storage precedes the commissioning of the delivered K°Bloc, the
K°Bloc must be stored as follows:
•
Leave the K°Bloc in the delivered packaging.
•
Store the unit in a closed and ventilated room.
•
The ambient air must be free of aggressive media and dust.
•
Ambient temperature range from 0 °C to + 55°C.
•
Avoid major temperature variations.
•
The environment must have low air humidity, causing no corrosion.
6.5 DISPOSAL
This chapter gives you information on how to dispose of the K°Bloc :
The fundamental rules below apply to disposal:
•
Dispose of all parts in accordance with the local and legal disposal regu-
lations.
•
In case of parts contaminated with dangerous substances, observe the
particular local and legal regulations.
Upon request, Kelvion will take care of disposing of your K°Bloc. The K°Bloc
will be dismounted, transported away and disposed of properly by our
employees against payment of the expenses incurred. If part of the K°Bloc
are contaminated, Kelvion cannot take care of disposal. In this case,
disposal of the K°Bloc is the responsibility of the operating company.
K°Bloc – Fully welded plate heat exchangers - English Version 2.2 - 01.2016
Commissioning and decommissioning, operation
Chapter 6
65
Advertisement
Table of Contents
