Kelvion KBloc Operating Instructions Manual page 53

WARNING
Danger of injury due to hazardous flow media!
When using hazardous flow media (explosive, flammable, corrosive, toxic,
high pressure, very hot or very cold) in the K°Bloc, you may suffer serious
injuries.
 Check the safety accessories fitted on the K°Bloc, see chapter „5.5.1
Optional safety accessories" (page 51)!
 Wear the prescribed safety equipment relevant for the flow medium in
question!
 Wear your personal protective equipment during all work!
WARNING
Hazard due to deactivated safety equipment!
When deactivating safety equipment for installation, maintenance or
commissioning work, you or other persons may be seriously injured and you
have to ensure that this produces no hazard to persons and material assets.
 Make sure at all times that no persons can be injured due to safety
equipment that has been put out of operation!
 Always inform all persons involved when you put safety equipment out of
operation!
 When using environmentally hazardous media, ensure that these can be
reliably collected in case of a K°Bloc leak and cannot pollute the environ-
ment!
 Observe the locally applicable instruction manual of the plant where the
K°Bloc is integrated.
K°Bloc – Fully welded plate heat exchangers - English Version 2.2 - 01.2016
Setting up and connecting the K°Bloc
Chapter 5
53