Exiting The Tmj Exposure Mode - Planmeca Proline EC Panoramic User Manual

TEMPOROMANDIBULAR JOINT EXPOSURE (P10)
matically open. The patient can now be guided from
the unit.
NOTE If automatic carriage return is activated, see
section "11.2 Automatic cassette carriage re-
turn" on page 31, the rotating assembly will re-
turn to the ready position before the temple
supports open.
Press the return key to drive the rotating assembly to
the ready position and the cassette carriage to the
loading position. This is not necessary if the cassette
carriage is set to return to the ready position automati-
cally.
Remove the cassette from the unit and process the
film.

9.3 Exiting the TMJ exposure mode

When you want to enter the panoramic exposure
mode, press and hold down the panoramic mode
PAN
selection key until you have heard two audible signals.
Planmeca Proline EC Panoramic X-ray 27
User's manual