Recalling Previous Exposure Settings; Quick Exposure Settings - Planmeca Proline EC Panoramic User Manual

ADDITIONAL FUNCTIONS

11.6Recalling previous exposure settings

CTL
READY
PRET
CTL

11.7Quick exposure settings

34 Planmeca Proline EC Panoramic X-ray
The exposure settings selected for the previous 25
exposures are stored in the memory. This information
can be recalled if required.
Press the control key to activate the additional function
mode. The indicator light will come on.
Press the height adjusting down key to recall the expo-
sure settings of the last exposure taken with the unit.
The settings that were selected for the exposure will
appear on their respective displays.
Press either of the height adjusting keys to scroll back-
wards or forwards through the memory.
NOTE If the temporomandibular joint exposure pro-
gram was used, the program number P 10 will
be shown on the main display.
Press the ready key if you wish to take another expo-
sure using any of the previously stored exposure set-
tings. The rotating assembly will move to the ready
position so that the exposure can be taken.
Press the control key if you do not wish to take an
exposure using settings from a previous exposure.
The unit will return to the normal mode.
This feature allows you to use preprogrammed expo-
sure settings. There are three memory locations for
both the panoramic and temporomandibular joint
exposure modes. Note that before using the quick
exposure settings you must first store the parameters
values in the memory.
PAN/CEPH MODEL:
There are three memory locations also for the cepha-
lometric mode.
User's manual