Planmeca Proline EC Panoramic User Manual page 13

Main display
Panoramic mode selection key
Return key
Cassette carriage in
loading position
Ready key
Cassette carriage
in ready position
User's manual
In normal operation the current time will appear on the
main display. If the unit malfunctions an error code will
09:00
be displayed. See section "14.2 Error codes" on page
40 for a list of error codes and their meanings.
Press and hold down the panoramic mode selection
key when you want to enter the panoramic mode. Hold
PAN
down the key until you have heard two audible signals:
one when you start to press the key and one when the
panoramic mode is entered. Taking a panoramic expo-
sure is described in section "8 PANORAMIC EXPO-
SURE" on page 17.
PAn
The text PAn is briefly shown on the Main display.
When the unit is switched on it is in the pan-
NOTE
oramic mode.
The text P 10 is shown on the main display
NOTE
when you are in the temporomandibular joint
exposure mode.
Press the return key after an exposure has been taken
to drive the rotating assembly back to the ready posi-
tion and cassette carriage to the loading position. The
return key can also be used to drive the cassette car-
riage from the ready position to the loading position.
Note that the rotating assembly can be set to return
automatically to the ready position, see section "11.2
Automatic cassette carriage return" on page 31.
Press the ready key to drive the cassette carriage and
READY
the rotating assembly to the ready position. The tem-
PRET
ple supports will close, if they are not already closed,
and the ready indicator light will come on.
NOTE The automatic closing of the temple supports
can be switched off, refer to section "11.4 Au-
tomatic closing of the temple supports" on
page 33.
CONTROL PANEL - KEYS AND DISPLAYS
Planmeca Proline EC Panoramic X-ray 9