Table of Contents
Advertisement
selecting one of these parameters, the relative mode will be loaded in 'real time' on the
NOTE:
monitor (DICOM OFFSET loads DICOM (USER) mode, COLOR TEMP loads COLOR
(USER) mode, and GAMMA COMP loads COLOR (USER) mode), so you can see image
modifications selecting the parameter and adjusting the values.
Pressing the Esc key, you will go back to the Main Menu, with cursor ready to the next item.
By selecting the OSD SETTING item and pressing the touching Enter key, the relative window appears.
Here following the meaning of each item of this menu:
OSD Setting
11.2.6.
- HOR POSITION
This allows to adjust the horizontal position of the OSD menu on the screen.
- VERT POSITION
This allows to adjust the vertical position of the OSD menu on the screen.
moving the OSD across the center of the screen, the OSD window will 'jump' some steps.
NOTE:
This is normal and is not a defect
- TIME-OUT OSD
When the OSD menu is displayed and no key is pressed, it will disappear
after the time setted up in this parameter. It is possible to choose among
the following values: 10", 20", 30", 45", 60", 90" or DISABLE ( the OSD
won‟ t disappear until you exit from OSD pressing the Esc key )
Image sticking is possible in case TIME OUT DISABLE is selected.
- TIME-OUT LCD
When there is no valid video signals at inputs of the display, the screen will
go in stand-by mode after the time setted up in this parameter. It is possible
to choose among the following values: 10", 1‟ or DISABLE ( the screen
won‟ t enter in stand-by mode ). If a valid signal is then applied to the monitor,
it will automatically turn on.
To operate on the parameter, press the Enter key when the cursor is on the desired parameter;
a double arrow cursor will appear ( ), indicating you can adjust the value pressing the
Down – or Up + keys.
MONITOR INFO
OUT MODE
USER SETTING
-> OSD SETTING
PRODUCT INFO
SERVICE
OSD SETTING
-> HOR POSITION
VERT POSITION
TIME-OUT OSD
TIME-OUT LCD
WARNING:
35
Advertisement
Table of Contents
