Table of Contents
Advertisement
11.2.
OSD Controls (ON Screen Display)
Trough the OSD menu, any user available function can be easily and intuitively accessed.
11.2.1.
Working in the OSD Menu
1) Press the Enter key to display the OSD MENU (or the request to input the password, if enabled)
2) Press the Up + or Down – keys to move upward / downward the highlight selection of menu item
Press again the Enter key to select the highlighted sub-menu (if available) or to select an
adjustable parameter.
3) If an adjustable parameter has been selected, press the Up + or Down – keys to adjust it.
4) Pressing the Esc key, the current menu window is replaced by the „upper‟ menu window.
5) Press the Esc key to go back to the root OSD menu level and then to exit from the OSD.
11.2.2.
Main OSD Menu
Press the Enter key to display the Main Menu (or the request to input the password, if enabled);
the cursor ( ) is ready on the first item.
By selecting the MONITOR INFO item and pressing the Enter key, the relative window will appear:
here following the meaning of each item of this menu:
Monitor Info
11.2.3.
- HWREL
Hardware release
- FWREL
Firmware release
- DVI PWR IN
Current status of DVI 5V power input
- DVI PWR OUT
Current status of DVI 5V power output
- REMAIN LIFE
Expected remaining life-time (in hours) of LCD panel lamps
-> MONITOR INFO
OUT MODE
USER SETTING
OSD SETTING
PRODUCT INFO
SERVICE
MONITOR INFO
HWREL
LP2
FWREL
2.00
DVI PWR IN
ON
DVI PWR OUT
ON
REMAIN LIFE
12.000
32
Advertisement
Table of Contents
