Table of Contents
Advertisement
8.3.6
IDE Configuration
You can use this screen to select options for the IDE Configuration settings. Use the up and down
< Arrow > keys to select an item. Use the < + > and < - > keys to change the value of the
selected option. A description of the selected item appears on the right side of the screen. The
settings are described on the following pages. An example of the IDE Configuration screen is
shown below.
SATA Controller
Enabled/Disable SATA Controller
Configure SATA as
Select a configuration IDE/AHCI for SATA Controller.
ETX-CV User's Manual
ETX-CV User's Manual
Page 51
Page 51
Advertisement
Table of Contents
Need help?
Do you have a question about the ETX Series and is the answer not in the manual?