Starting And Opening The Initial Firmware - Bosch Rexroth IndraControl XM42 Operating Instructions Manual

42/65
Device description
LED Function
D Delete network configuration Red
E Start First Touch
Tab. 12-4: LED states
The LED states described are only valid together with the initial firm-
ware.
For more information on the LED states in operation, refer to the
functional description of the respective control system (IndraMotion
MLC, IndraMotion MTX).

12.2.3 Starting and opening the initial firmware

No system firmware is yet installed on the XM4x control upon delivery. Apply the
supply voltage and the control starts the initial firmware and the commissioning
tool "IndraControl First Touch" automatically. To manually execute the basic
functions of the initial firmware, press the "Reset" button when switching on the
24 V supply voltage until the LEDs DIA3 and DIA4 flash alternatingly in red. Sub-
sequently, one of the following functions can be opened via a menu structure:
Menu item number Functions
1 Start First Touch
2 Start First Touch, delete network configuration
3 Start First Touch, delete network configuration, reset user
name and password
4 Start First Touch, delete network configuration, reset user
name and password, delete files, restore state upon delivery
Tab. 12-5: Menu items of the initial firmware
If the function was executed successfully, the LED "E" changes from
red to green after some seconds.
The control must not be switched off during this time.
Bosch Rexroth AG R911345566_Edition 03
Color
Flashing red
Red
Flashing red
Green
IndraControl XM42 Controls
Status
Function is selected, pro-
cessed
Confirm selection
Function is selected, pro-
cessed
Confirm selection
First Touch running
LED
E
E
D
E
D
BT
E
D
BT
ERR
Color
Red
Red
Red
Red
Red
Red
Red
Red
Red
Red