Table of Contents
Advertisement
IndraControl XM42 Controls
10.3 Mounting the control
NOTICE
Attach the modules vertically on the bus base and remove them vertically from
the bus base.
Fig. 10-5: Positioning and removing modules only vertically
NOTICE
Before mounting or demounting components, disconnect the control - includ-
●
ing its components - from voltage
Connect the voltage only after the control and its components have been set
●
up
NOTICE
Fasten the top-hat rail adequately.
●
Connect the top-hat rail to a functional earth.
●
Mount the control on the top-hat rail.
●
Install the control in a control cabinet or an appropriate housing.
●
Mounting the control bus base
1. Correctly position the bus base as per the descriptions "Right Side" and
"Left Side".
Mounting, demounting and electric installation
Damages at the contacts by tilting the modules
Component destruction due to plug mounting
under voltage!
Possible damage to property due to improper
top-hat rail mounting
R911345566_Edition 03 Bosch Rexroth AG
19/65
Hide quick links:
Advertisement
Table of Contents
