Electric Installation; External Power Supply Unit - Bosch Rexroth IndraControl XM42 Operating Instructions Manual

Table of Contents

Advertisement

IndraControl XM42 Controls

10.7 Electric installation

WARNING
Any dangerous system states, which might cause personal injury, must be pre-
vented!
Protection upon direct and indirect contact must be ensured by the specified
measures (connection to protective conductor, insulation, etc.).
NOTICE
Any dangerous system states, which might cause material damage, must be
prevented!
Protection upon direct and indirect contact must be ensured by the specified
measures (connection to protective conductor, insulation, etc.).

10.7.1 External power supply unit

DANGER
Connect power supply units generating protective extra-low voltage (24 V) on-
ly to supply voltages designed for these power supply units. Note the over-
voltage categories (refer to the documentation of the power supply unit)
Do not apply the supply voltage to the protective extra-low voltage
All control components are supplied from 24 V voltage supplies (SELV/PELV).
Use the Bosch Rexroth power supply unit VAP01.1H-W23-024-010-NN, part num-
ber R911171065, for the logic supply. For further information on the external
power supply unit and on the creation of overvoltage categories, refer to the
documentation of the power supply unit.
All lines of the 24 V voltage supply have to be routed separately from lines carry-
ing higher voltages.
All peripherals, such as digital sensors or actuators connected to the interfaces
of the control, also have to comply with the criteria of safety-separated circuits.
The same external power supply unit has to supply the 24 V voltage
supply of the XMx control and the extension modules. Connect the
voltage supply to the XD1 plugs of the XMx control and then bridge
the cables to the power connectors XD1 of the extension modules.
Mounting, demounting and electric installation
Danger of personal injury due to incorrect
mounting or electric installation!
Danger of material damage due to incorrect
mounting or electric installation!
Danger of lethal injury due to hazardous electric
voltage
R911345566_Edition 03 Bosch Rexroth AG
25/65

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents