Ej7211-0010 - Technical Data - Beckhoff EJ7211-0010 Documentation

3.2

EJ7211-0010 - Technical data

Technical data
Number of outputs
Connection method
Load type
DC link supply voltage
Output current I
N
Peak current I
N
Frequency range
PWM clock frequency
Current controller frequency
Rated speed controller frequency
Output voltage motor brake
Max. motor holding brake output current
Current consumption via E-bus
Supports NoCoeStorage function
Electrical isolation
Permissible ambient temperature range during operation
Permissible ambient temperature range during storage
Permissible relative humidity
Operation altitude
Dimensions (W x H x D)
Weight
Mounting
Pollution degree
Installation position
Position of coding pins [} 29]
Color coding
Vibration/shock resistance
EMC immunity/emission
EMC category
Protection class
Approval
CE approval
The CE Marking refers to the EtherCAT plug-in module mentioned above.
If the EtherCAT plug-in module is used in the production of a ready-to-use end product (PCB in con-
junction with a housing), the manufacturer of the end product must check compliance of the overall
system with relevant directives and CE certification.
To operate the EtherCAT plug-in modules, they must be installed in a housing.
EJ7211-0010
EJ7211-0010
1 x servomotor, absolute Feedback, motor brake, 2 digital inputls
Direct motor connection
Permanent-magnet synchronous motors
8...48 V
DC
4.5 A (rms) / 6.3 A (peak value)
9 A (rms) / 12.6 A (peak value) for 1 second
0 Hz.. 599 Hz
16 kHz
double PWM switching frequency
16 kHz
24 V
DC
max. 0.5 A
typ. 130 mA
yes
500 V (E-bus/signal voltage)
0°C ... + 55°C
-25°C ... + 85°C
95%, no condensation
max. 2,000 m
approx. 24 mm x 66 mm x 55 mm
approx. 50 g
on single distribution board
2
Standard [} 25]
1 and 8
orange
according to EN 60068-2-6 / EN 60068-2-27 (with corresponding sig-
nal distribution board)
conforms to EN 61000-6-2 / EN 61000-6-4 (with corresponding sig-
nal distribution board)
Category C3 - standard
Category C2, C1 - auxiliary filter required
EJ module: IP20
EJ system: dependent on the signal distribution board and housing
CE, UL
Version: 1.0
Product Overview
15