Physical Description; Making Connection - CBC ZN-MDI2 M-IR Series Quick User Manual

Quick User Guide

2. Physical Description

1. Network (RJ-45 PoE supported)
2. Power connector (24VAC: Heater)
3. I/O signal terminal
Audio In (Line in)
Audio Out (Line Out)
Alarm In (Dry Contact)
Alarm Out (Relay out [0.5A:125VAC / 1A:30VDC])
4. Micro SD card (SDHC supported)
5. Control Button
6. Video output for service monitor/Status LED

3. Making Connection

1. If you have external devices such as sensor or alarms, make connection
from connectors.
2. Connect Ethernet cable to make connection to the network hub.
3. Connect power cable to the camera.
Please refer to User's manual in software CD.
ZN-BxMTP Series Network Camera
2
Ver1.20 EN