Advertisement
Quick User Guide
Warning before installation
-Power off the Network camera if it is found to be smoking or smells unusual.
-Keep the Network camera away from water. If the Network camera gets wet,
power off immediately.
-Do not place the Network camera near heat sources, such as a television or
oven.
-Refer to your instruction manual for the operating temperature.
-Keep the Network camera away from direct sunlight.
-Do not place the Network camera in high humidity environments.
-Do not place the Network camera on unsteady surfaces.
-Do not touch the Network camera when there is lightning present.
-Do not disassemble the Network camera.
-Do not drop the Network camera.
-Do not insert any object into the Network camera, such as a screwdriver.
For other safety and regulation information, please refer to "User's manual".
1. Check Contents
No. Item
1
Network Camera
2
Software CD
3
Quick User Guide
4
Accessories
Description
ZN-BxMTP Series (ZN-B2MTP / ZN-B1MTP)
User's Manual, Utility software
This document
Template for installation
Anchor : 4pcs
Tapping Screw 4x30 : 4pcs
Hexalobular L-key Wrench
Wrench bolt 3pcs
Video monitor cable
Power Jack Cable
Terminal Block (2pin/8pin)
ZN-BxMTP Network Camera
Ver1.00 EN
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CBC ZN-B2MTP
Summary of Contents for CBC ZN-B2MTP
- Page 1 -Do not insert any object into the Network camera, such as a screwdriver. For other safety and regulation information, please refer to “User’s manual”. 1. Check Contents No. Item Description Network Camera ZN-BxMTP Series (ZN-B2MTP / ZN-B1MTP) Software CD User’s Manual, Utility software Quick User Guide This document Accessories...
-
Page 2: Physical Description
Quick User Guide ZN-BxMTP Network Camera 2. Physical Description 1. Network (RJ-45 PoE supported) 2. Power connector (AC24V) 3. I/O signal terminal Audio In (Line in) Audio Out (Line Out) Alarm In (Dry Contact) Alarm Out (Relay out [0.5A:AC125V/1A DC30V]) 4. - Page 3 Quick User Guide ZN-BxMTP Network Camera 4. Assign IP address The default setting of the camera is set to “DHCP” and “UPnP” function is set to ON. If you have a DHCP server on your network and UPnP function is enabled on your PC you can find the network camera in “My network”.
- Page 4 Quick User Guide ZN-BxMTP Network Camera 5. Web browser connection Note : The Network camera supports Internet Explorer 7 or above. Please check version of your browser and update it if necessary. When you first access the camera you need to download and install an Active X control from the camera to display a Live image.
Need help?
Do you have a question about the ZN-B2MTP and is the answer not in the manual?
Questions and answers