CBC ZN-MDI2 M-IR Series Quick User Manual page 123

Quick User Guide
Warning before installation
-Power off the Network camera if it is found to be smoking or smells unusual.
-Keep the Network camera away from water. If the Network camera gets wet,
power off immediately.
-Do not place the Network camera near heat sources, such as a television or
oven.
-Refer to your instruction manual for the operating temperature.
-Keep the Network camera away from direct sunlight.
-Do not place the Network camera in high humidity environments.
-Do not place the Network camera on unsteady surfaces.
-Do not touch the Network camera when there is lightning present.
-Do not disassemble the Network camera.
-Do not drop the Network camera.
-Do not insert any object into the Network camera, such as a screwdriver.
For other safety and regulation information, please refer to "User's manual".
1. Check Contents
No. Item
1 Network Camera
2 Software CD
3 Quick User Guide
4 Accessories
Description
ZN-DTxMTP Series
User's Manual, Utility software
This document
Bottom Cushion Plate
Both-sided Tape
Silica-Gel
Anchor : 4pcs
O-ring : 4pcs
Tapping Screw 4x30 : 4pcs
Hexalobular L-key Wrench
Alarm I/O extension cable
Video monitor cable
ZN-DTxMTP Series Network Camera
1
Ver1.20 EN