Table of Contents
Advertisement
Quick User Guide
5. Web browser connection
Note : The Network camera supports Internet Explorer 7 or above.
Please check version of your browser and update it if necessary.
When you first access the camera you need to download and install an
Active X control from the camera to display a Live View image.
Default User and Password are set to "ADMIN" and "1234". Please type in
the user ID and password to connect the network camera.
Note: By Default the cameras come with "Installation Mode" set to "ON" to
enable Analog output. You must turn installation mode off to use 720p
or 1080p streaming.
For further information for setup, please refer to User's manual
in software CD.
ZN-MD2xx Series Network Camera
3
Ver1.00 EN
Advertisement
Table of Contents
