Related Manuals for CBC GANZ Z8-VD2V-2
Summary of Contents for CBC GANZ Z8-VD2V-2
- Page 1 Camera（1302E）OSD Operation Guide ISSUE V1.0 DATE 2019-05-06 ganzsecurity.com Tele: 1 (919) 230-8700...
-
Page 2: About This Document
Operation Guide Contents About This Document Purpose This document describes how to use the web management system for DVR and the cameras managed by DVR. Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates an imminently hazardous situation which, if not... -
Page 3: Table Of Contents
Operation Guide Contents Contents About This Document ........................ii 1 OSD Main Menu ........................... 1 1.1 Procedure ..................................1 1.1.1 Camera Control Using Five Buttons .......................... 1 1.2 OSD Main Menu Interface ............................1 2 OSD Setting ........................... 3 2.1 AE ....................................3 2.2 WB .................................... -
Page 4: Osd Main Menu
Operation Guide 1 OSD Main Menu OSD Main Menu 1.1 Procedure 1.1.1 Camera Control Using Five Buttons If your camera has four arrow buttons and one SET button, you can use the buttons to operate the OSD main menu. Figure 1-1 shows the five buttons. Figure 1-1 Five-button layout The buttons have the following functions: ... - Page 5 Operation Guide 1 OSD Main Menu Figure 1-2 OSD main menu interface ----End Issue V1.0 (2019-05-06)
-
Page 6: Osd Setting
Operation Guide 2 OSD Setting OSD Setting 2.1 AE AE is intended to adjust image brightness by setting parameters such as aperture, shutter, and gain. The EXPOSURE interface includes BRIGHTNESS, EXPOSURE MODE, ADVANCED. Procedure Step 1 Press the UP or DOWN button to select AE. Step 2 Press the SET button to open the EXPOSURE interface, as shown in Figure 2-1. - Page 7 Operation Guide 2 OSD Setting Step 4 Press the UP or DOWN button to select EXPOSURE MODE and press the LEFT or RIGHT button to select a exposure mode. The exposure mode includes GLOBE, and BLC. − BLC: Press the LEFT or RIGHT button to select BLC, press the LEFT or RIGHT button to adjust BLC value.
- Page 8 Operation Guide 2 OSD Setting Procedure Step 1 Press the UP or DOWN button to select WB. Press the SET button to open the WB interface, as shown in Figure 2-3. Figure 2-3 AWB interface Step 2 Press the LEFT or RIGHT button to set the MODE. The options are ATW, MWB. The default mode is ATW When MWB mode is selected, you can set white balance parameters, as shown in Figure 2-4.
-
Page 9: Day Night
Operation Guide 2 OSD Setting Figure 2-4 MWB interface 1. Press the UP or DOWN button to select RGAIN, and press the LEFT or RIGHT button to set RGAIN. The default RGAIN is 18 and the setting range is 0-32. 2. -
Page 10: Image Enhance
Operation Guide 2 OSD Setting Figure 2-5 DAY/NIGHT interface Step 2 Press the LEFT or RIGHT button to set the Mode. Step 3 Press the UP or DOWN button to select RETURN and press the SET return to the OSD main menu interface. - Page 11 Operation Guide 2 OSD Setting Figure 2-6 Image enhance Procedure Step 1 Press the UP or DOWN button to select IMAGE ENHANCE. Press the SET button to open the IMAGE ENHANCE interface. Step 2 Press the UP or DOWN button to select CONTRAST. Press the LEFT or RIGHT button to choose manual or auto , manual mode need press DOWN button to go next one, press the LEFT or RIGHT button set the CONTRAST value.
-
Page 12: Video Setting
Operation Guide 2 OSD Setting 2.5 VIDEO SETTING The Video Setting interface includes VIDEO STANDRADN HD FORMAT and WDR. Procedure Step 1 Press the UP or DOWN button to select VIDEO SETTING. Press the SET button to open the VIDEO SETTING interface, as shown in Figure 2-7. Figure 2-7 Video Setting interface Step 2 Press the UP or DOWN button to select VIDEO STANDARD and press the LEFT or RIGHT button to choose. -
Page 13: Reset
Operation Guide 2 OSD Setting 2.7 RESET Press the UP or DOWN button to select RESET, and press the SET button to reset the camera OSD parameter. 2.8 SAVE-EXIT Press the UP or DOWN button to select SAVE-EXIT, and press the SET button to save the OSD settings and return to the camera's real-time video interface.