Making Connection - CBC ZN-MDI2 M-IR Series Quick User Manual

Quick User Guide
4. Network (RJ-45 PoE supported)
5. Reset Button
6. Power (DC12V / AC24V)
7. Status LED
8. DC Iris
Front View
9. Flange back locking screw

3. Making Connection

1. If you have external devices such
as sensor or alarms, make connection
from terminal block connector.
2. Connect Ethernet cable to make connection
to the network hub.
ZN-C Series Network Camera
3. Connect power cable to the camera.
When you use PoE function, you don't
need to connect power.
2
Ver1.20 EN