Advertisement
Quick User Guide
Warning before installation
-Power off the Network camera if it is found to be smoking or smells unusual.
-Keep the Network camera away from water. If the Network camera gets wet,
power off immediately.
-Do not place the Network camera near heat sources, such as a television or
oven.
-Refer to your instruction manual for the operating temperature.
-Keep the Network camera away from direct sunlight.
-Do not place the Network camera in high humidity environments.
-Do not place the Network camera on unsteady surfaces.
-Do not touch the Network camera when there is lightning present.
-Do not disassemble the Network camera.
-Do not drop the Network camera.
-Do not insert any object into the Network camera, such as a screwdriver.
For other safety and regulation information, please refer to "User's manual".
1. Check Contents
No. Item
1
Network Camera
2
Software CD
3
Quick User Guide
4
Accessories
2. Physical Description
1. Network (RJ-45 PoE required)
2. Video output for service monitor
3. Control Button
Description
ZN-MB2xx Series
User's Manual, Utility software
This document
Wall Bracket : 1pc
Tapping Screw M4x30 : 3pcs
Anchor : 3pcs
ZN-MB2xx Series Network Camera
1
Ver1.20 EN
Advertisement
Table of Contents
Related Manuals for CBC ZN-MB2 Series
Summary of Contents for CBC ZN-MB2 Series
- Page 1 Quick User Guide ZN-MB2xx Series Network Camera Warning before installation -Power off the Network camera if it is found to be smoking or smells unusual. -Keep the Network camera away from water. If the Network camera gets wet, power off immediately. -Do not place the Network camera near heat sources, such as a television or oven.
- Page 2 Quick User Guide ZN-MB2xx Series Network Camera 3. Making Connection Connect Ethernet cable to make a connection to the PoE HUB. The camera support PoE only. 4. Assign IP address The default setting of the camera is set to “DHCP” and “UPnP” function is set to ON.
- Page 3 Quick User Guide ZN-MB2xx Series Network Camera 5. Web browser connection Note : The Network camera supports Internet Explorer 7 or above. Please check version of your browser and update it if necessary. When you first access the camera you need to download and install an Active X control from the camera to display a Live image.
Need help?
Do you have a question about the ZN-MB2 Series and is the answer not in the manual?
Questions and answers