Table of Contents
Advertisement
Quick User Guide
1. Control Button
-Change Video output format NTSC/PAL. (toggle)
-Factory Default (Keep hold more than 10 seconds)
2. Network LED
3. Status LED
4. Reset Button
5. Video output for service monitor
6. Lock nut
7. Focus adjustment
8. Network (RJ-45 PoE required)
3. Making Connection
Connect Ethernet cable to make a connection to the POE HUB.
The camera support POE only.
4. Assign IP address
The default setting of the camera is set to "DHCP" and "UPnP" function is
set to ON. If you have a DHCP server on your network and UPnP function is
enabled on your PC you can find the network camera in "My network".
If a DHCP server is not available on your network, please assign IP address
by the following process.
Execute PixelPro_Discovery_Tool.exe. It will search cameras on the network
automatically.
1) After the camera is listed in camera list, select the camera.
2) Type in the all network information.
3) Click "Apply" button
Then double click the camera in the list, Internet explorer will open
automatically.
ZN-MD2xx Series Network Camera
3. Connect power cable to the camera.
When you use PoE function, you don't
need to connect power.
2
Ver1.00 EN
Advertisement
Table of Contents
