Main Part Description
Dome Cover
DIP Switch
Drop Prevention Spring
Mount Screw Hole
Main Connector
LAN Connector
Audio Port
Video (BNC)
IP Module Reset Switch
Megapixel Speed Dome Camera Instruction Manual
Do not remove the protection vinyl from the dome cover before finishing
all the installation processes. This is to protect the dome cover from
scratches or dust.
Used to set up the camera IDs and protocols.
Used to protect the product from being dropped by connecting safety
wire of bracket to hook of main body when being installed.
Used to assemble the main body with a bracket using screws.
Used for the power wire, the video cable and the RS-485 communication
cable connection.
Used for Ethernet cable connection. (Only supported on IP models)
Used for Audio In/Out connection
Used for HD-SDI cable connection.
Used for system rebooting
INTRODUCTION
9/37
1