Table of Contents
Advertisement
Quick User Guide
4. Assign IP address
The default setting of the camera is set to "DHCP" and "UPnP" function is
set to ON. If you have a DHCP server on your network and UPnP function is
enabled on your PC you can find the network camera in "My network".
If a DHCP server is not available on your network, please assign IP address
by the following process. Default IP address will be shown as 255.255.255.255.
Execute PixelPro_Discovery_Tool.exe. It will search cameras on the network
automatically.
1) After the camera is listed in camera list, select the camera.
2) Type in the all network information.
3) Click "Apply" button, the setting will be showed in the list.
Then double click the camera in the list, Internet explorer will open
automatically.
5. Web browser connection
Note : The Network camera supports Internet Explorer 7 or above.
Please check version of your browser and update it if necessary.
When you first access the camera you need to download and install an
Active X control from the camera to display a Live image.
Default User and Password are set to "ADMIN" and "1234". Please type in
the user ID and password to connect the network camera.
ZN-B Series Network Camera
Ver1.20 EN
3
Advertisement
Table of Contents
