Making Connection; Assign Ip Address - CBC ZN-MDI2 M-IR Series Quick User Manual

Quick User Guide
1. Control Button
-Change Video output format NTSC/PAL. (toggle)
-Factory Default (Keep hold more than 10 seconds)
2. Status LED
3. Reset Button
4. Video output for service monitor
5. Network (RJ-45 PoE required)

3. Making Connection

Connect Ethernet cable to make a connection to the PoE HUB.
The camera support PoE only.

4. Assign IP address

The default setting of the camera is set to "DHCP" and "UPnP" function
is set to ON. If you have a DHCP server on your network and UPnP
function is enabled on your PC you can find the network camera in
"My network".
If a DHCP server is not available on your network, please assign IP
address by the following process. Default IP address will be shown as
255.255.255.255.
Execute MultiUpgradeTool.exe. It will search cameras on the network
automatically.
②
③
ZN-MDI2xxM-IR Series Network Camera
①
2
Ver1.20 EN