CBC ZN-MDI2 M-IR Series Quick User Manual page 45

Quick User Guide
Warning before installation
-Power off the Network camera if it is found to be smoking or smells unusual.
-Keep the Network camera away from water. If the Network camera gets wet, power
off immediately.
-Do not place the Network camera near heat sources, such as a television or oven.
-Refer to your instruction manual for the operating temperature.
-Keep the Network camera away from direct sunlight.
-Do not place the Network camera in high humidity environments.
-Do not place the Network camera on unsteady surfaces.
-Do not touch the Network camera when there is lightning present.
-Do not disassemble the Network camera.
-Do not drop the Network camera.
-Do not insert any object into the Network camera, such as a screwdriver.
For other safety and regulation information, please refer to "User's manual".
1. Check Contents
No. Item
1 Network Camera
2 Software CD
3 Quick User Guide
4 Accessories
2. Physical Description
Network (RJ-45 POE required)
Video output for serveice monitor
Reset Switch
3. Making Connection
Connect Ethernet cable to make a connection to the POE HUB.
The camera supports POE only.
Description
ZN-M2AF
User's Manual, Utility software
This document
Video monitor cable
Tripod
Screw for tripod mount : 2pcs
ZN-M2AF Network Camera
Ver1.00 EN
1