Table of Contents
Advertisement
Quick User Guide
Warning before installation
-Power off the Network camera if it is found to be smoking or smells unusual.
-Keep the Network camera away from water. If the Network camera gets wet, power
off immediately.
-Do not place the Network camera near heat sources, such as a television or oven.
-Refer to your instruction manual for the operating temperature.
-Keep the Network camera away from direct sunlight.
-Do not place the Network camera in high humidity environments.
-Do not place the Network camera on unsteady surfaces.
-Do not touch the Network camera when there is lightning present.
-Do not disassemble the Network camera.
-Do not drop the Network camera.
-Do not insert any object into the Network camera, such as a screwdriver.
For other safety and regulation information, please refer to "User's manual".
1. Check Contents
No.
Item
1
Network Camera
2
Software CD
3
Quick User Guide
4
Accessories
2. Physical Description
Description
ZN-MD2xx Series
User's Manual, Utility software
This document
Silica-gel
Templates for installation
Video monitor cable
Focus adjust ring
Anti reflect rubber
Tapping Screw M4x30 : 3pcs
Anchor : 3pcs
Screw M4x8 : 4pcs
Surface Mount Bracket
L-Wrench (T20)
ZN-MD2xx Series Network Camera
1
Ver1.00 EN
Advertisement
Table of Contents
