Table of Contents
Advertisement
Quick User Guide
1) After the camera is listed in camera list, select the camera.
2) Type in the all network information.
3) Click "Change IP address" button to apply settings to the camera.
When double click the camera in the list, the default web browser
(Internet Explorer or compatible equivalent) will open and automatically
connect to the camera.
5. Web browser connection
Note : The Network camera supports Internet Explorer 7 or above.
Please check version of your browser and update it if necessary.
When you first access the camera you need to download and install an
Active X control from the camera to display a Live image.
Default User and Password are set to "ADMIN" and "1234".
Please type in the user ID and password to connect the network camera.
For further information for setup, please refer to User's manual
in software CD.
ZN-MDI2xxM-IR Series Network Camera
3
Ver1.20 EN
Advertisement
Table of Contents
