Table of Contents
Advertisement
Replacing the NE1064TO
Preparing and Returning the NE1064TO
© Copyright Lenovo 2020
If replacing the NE1064TO, remove all associated components and options
according to the instructions in this chapter. Remove and retain clips, cords, cables,
modules, caps or blanks, air-duct option (if installed), and any mounting hardware.
These items can then be reinstalled on the replacement unit.
When you remove the NE1064TO from the rack, record the product Machine
Type-Model (MTM) number and serial number to use for the replacement switch.
See
"Before Installing the NE1064TO" on page 32
labels on the switch or through the switch firmware interface.
To return the chassis to customer service for replacement, see
Help and Technical Assistance"
is necessary to return a component. After you remove the NE1064TO unit, securely
pack it for shipping.
Replace power and fan modules. For details, see
Supply Module" on page 57
page
61.
Install the replacement NE1064TO hardware as directed in
NE1064TO Hardware and
to locate the product information
to help you gather all the required information that
"Removing and Replacing a Power
and
"Removing and Replacing a Fan Module" on
Options").
Chapter 4: Removing and Replacing Components
Appendix A, "Getting
Chapter 3, "Installing
69
Advertisement
Table of Contents
