Switching Ports; 10G Base-T Ports; 10G Base-T Port Leds - Lenovo ThinkSystem NE1064TO RackSwitch Installation Manual

Switching Ports

10G Base-T Ports

10G Base-T Port LEDs

24
NE1064TO Installation Guide
The NE1064TO contains the following:
 Forty-eight 10G Base-T
 Six 100 GbE Quad Small Form Pluggable 28 (QSFP28) ports
Note: Only four out of the six QSFP28 ports can be used in breakout mode
since the maximum number of supported ports is 64.
QSFP28 ports can be populated with optical QSFP28 modules or Direct-Attach
Cables (DACs), including those that allow the port to be used as four 25
GbESFP28/10 GbE SFP+ ports, two 50 GbE QSFP28 ports, or as a single 40 GbE
QSFP+ port. SFP+ ports can be populated with optical or copper transceiver modules
or DACs.
Forty-eight 10G-Base-T ports are located on the front panel.
The Base-T LEDs for the NE1064TO are shown in the following illustration:
Figure 10. Base-T Port LEDs
Status LEDs for the 10G Base-T ports are described in the following table.
Table 4.
10G Base-T port status LED behavior
LED State
Link Solid green
10G Mode/
Flashing green Packet transmitting or receiving
1G Mode
Light off
Functional Meaning
Secure 1G/10G connection or link
Link down or port disabled