3. From the front, slide the switch into the rack at the desired height.
4. Secure the switch unit to the rack posts with M6 screws (Item 3) and either clip nuts
(Item 4) or cage nuts (Item 5). Torque the screws to approximately 5.7 Nm ± 0.1 Nm
(50 inch-pounds).
5. Connect all external cables in accordance with the
page
6. Initialize the switch. See
© Copyright Lenovo 2020
3
36.
4
Chapter 5, "Initializing the
Chapter 3: Installing NE1064TO Hardware and Options
"Cabling Guidelines" on
NE1064TO", on
page
71.
39