Lenovo ThinkSystem NE1064TO RackSwitch Installation Manual page 65

6. Loosen and remove the M6 screws, and clip nuts (or cage nuts) connecting the front
mounting brackets to the front rack posts.
7. Slide the NE1064TO unit out of the rack.
8. Loosen and remove the M4 screws that attach the front mounting brackets to each
side of the switch.
9. If replacing the unit with another NE1064TO, see
page
© Copyright Lenovo 2020
1
69.
3
"Replacing the NE1064TO" on
Chapter 4: Removing and Replacing Components
5
1
2
65