Table of Contents
Advertisement
Reset Button
USB 2.0 Port
© Copyright Lenovo 2020
The Reset button is recessed within a hole on the front panel. Use a straightened
paper clip or similar object to press the Reset button.
Figure 7. Reset Button
The Reset button allows technicians to reset the switch as follows:
Normal reset — the switch starts a forced reload procedure without saving the
current running configuration. This action is intended for when the switch is
unresponsive and needs to be restarted to resume its normal functions.
Factory reset — the switch reloads and reverts all its configuration settings to
the factory defaults.
Note: The preceding functions depend on the installed OS.
The USB 2.0 port enables you to connect a USB drive to the switch. You can copy
files from the switch to the USB drive, or from the USB drive to the switch. You can
also start the switch using files on the USB drive.
Figure 8. USB 2.0 port
The supported file system formats for USB drives are FAT32 and NTFS (read-only).
Chapter 2: Switch Components
21
Advertisement
Table of Contents
