Transport And Lifting Instructions; Loading - Mec Crossover Series Operator's Manual

Crossover Series

Transport and Lifting Instructions

Safety Information
This section is provided for reference and does not supersede any government or company policy
regarding the loading, transport or lifting of MEC machinery.
Truck drivers are responsible for loading and securing machines, and should be properly trained and
authorized to operate MEC machinery. Drivers are also responsible for selecting the correct and
appropriate trailer according to government regulations and company policy. Drivers must ensure
that the vehicle and chains are strong enough to hold the weight of the machine (see the serial number
plate for machine weight).

Loading

Free-wheel configuration for Winching or Towing.
RUNAWAY HAZARD!
After releasing the brakes there is nothing to stop machine travel. Machine will roll freely on slopes.
ALWAYS chock the wheels before manually releasing the brakes.
Disengage Brakes before Towing or Winching
Engage Brakes before Driving
Page 38
June 1, 2012
The machine can be winched or towed short distances at speeds not to exceed 5 MPH (8 km/h).
Before towing or winching the machine, it is necessary to release the brakes. Reset the brakes
after towing or winching.
Hand Pump
Brake Release Valve
• Chock the wheels.
• Press the Brake Release Valve, then press the Hand Pump button on the Functions
Manifold repeatedly until the brakes release.
The brakes reset automatically when the engine is started.
The brakes may be manually applied by pulling the Brake Release Valve out.
Transport and Lifting Instructions
ART_3837
Crossover Series
92555