Section 12 - Transport And Lifting Instructions; Transport And Lifting Instructions - Mec 1330SE Operator's Manual

Section 12 - Transport and Lifting Instructions

Safety Information
Loading Instructions
Free-wheel configuration for Winching or Towing
The machine can be winched or towed short distances at speeds not to exceed 2.5 MPH (4 km/h).
Before towing or winching the machine, it is necessary to release the brakes. Reset the brakes after
towing or winching.
Disengage Brakes before Towing or Winching
1. Chock the wheels.
2. Turn the Key Switch to the OFF position.
3. Set the red Emergency Stop buttons to the ON position at both
the ground and platform controls.
4. At the Ground Controls panel, press and hold the Lift/Lower
Switch to the DOWN position, then turn on the Key Switch to
the "Ground" position.
5. Hold the Lift/Lower Switch in this position until a continuous
alarm sounds, signalling that the brake has been released.
Resetting Brakes
1. Turn the Key Switch to the OFF position to reset the brake.
Page 37

Transport and Lifting Instructions

Transport and Lifting Instructions
This section is provided for reference and does not supersede any
government or company policy regarding the loading, transport or lifting
of MEC machinery.
Truck drivers are responsible for loading and securing machines, and
should be properly trained and authorized to operate MEC machinery.
Drivers are also responsible for selecting the correct and appropriate
trailer according to government regulations and company policy. Drivers
must ensure that the vehicle and chains are strong enough to hold the
weight of the machine (see the serial number plate for machine weight).
While loading and unloading, the transport vehicle must be parked on a
level surface and secured to prevent rolling.
RUNAWAY HAZARD!
After releasing the brakes there is nothing to stop machine travel.
Machine will roll freely on slopes.
ALWAYS chock the wheels before manually releasing the brakes.
1330SE - Operator's Manual
June 2023
Push Down
& Hold
Turn to
Ground
Art_4998A