Crossover Series
Routine Maintenance
IMPORTANT— The operator may perform only maintenance items on the Pre-Start Inspection Checklist. Frequent and Annual
maintenance must be performed by qualified service technicians.
Pre-Start Inspection
Frequent and Annual Maintenance
Maintenance Lock
NEVER perform work or inspection on the machine with the platform elevated without first blocking
the scissor assembly with the Maintenance Lock.
Page 28
June 1, 2012
Perform routine maintenance as identified in the Pre-Start Inspection Checklist on page 31.
Frequent Inspection Checklists and Annual Inspection Reports must be completed by
qualified service technicians trained and authorized to perform maintenance on this machine,
and must be done in accordance with the procedures outlined in the service manual. Scheduled
maintenance inspection checklists are included in this manual for use by qualified service
technicians.
Machines that have been out of service for more than three months must have the Frequent
Inspection Checklists completed before returning to service.
To set the Maintenance Lock, raise the platform enough to allow the
Maintenance Lock to rotate to vertical. Carefully lower the platform until
the pin above rests securely on the Maintenance Lock.
ART_3848
Maintenance
92555
Crossover Series