Fall Hazards; Collision Hazards - Mec Crossover Series Operator's Manual

Crossover Series

Fall Hazards

Art_2826
DO NOT CLIMB ON RAILS
Art_2825
DO NOT EXIT PLATFORM WHEN
ELEVATED

Collision Hazards

Art_2835
Art_2829
Art_2827
Page 6
June 1, 2012
DO NOT sit, stand or climb on the platform guard rails. Maintain a firm footing on the
platform floor at all times.
DO NOT exit the platform when elevated
Keep the platform floor clear of debris.
DO NOT fasten a fall restraint lanyard to an adjacent structure.
Ensure that the platform entry is properly closed and secured before operating the machine.
Operators must comply with employer and job site rules and governmental regulations
regarding the use of personal protective equipment.
Check path before moving for equipment, materials or other obstructions.
Check path before moving for overhead obstructions.
Check path before moving for crushing hazards when holding the platform rail.
Reduce travel speed when moving the machine on slopes, when near personnel and obstacles,
or when surface conditions are wet, slippery or otherwise limiting.
DO NOT operate in the path of any crane unless the controls of the crane have been locked out
and/or precautions have been taken to prevent any possible collision.
Stunt driving and horseplay are PROHIBITED.
Watch for personnel and obstructions below the platform when lowering the platform.
Safety
92555
Crossover Series