Mec Micro 26 Service & Parts Manual
  1. Manuals
  2. Brands
  3. Mec Manuals
  4. Scissor Lifts
  5. Micro 26
  6. Service & parts manual

Mec Micro 26 Service & Parts Manual

Hide thumbs Also See for Micro 26:
Table of Contents

Advertisement

Quick Links

See also: Operator's Manual
Service & Parts Manual
Micro 26
ART_5484
Serial Number Range
Part # 43549
17100001 - Up
April 2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Micro 26 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Mec Micro 26

Summary of Contents for Mec Micro 26

  • Page 1 Service & Parts Manual Micro 26 ART_5484 Serial Number Range Part # 43549 17100001 - Up April 2019...
  • Page 2 Date Reason for Update April 2019 New Release MEC Aerial Work Platforms 1401 S. Madera Avenue, Kerman, CA 93630 USA Toll Free: 1 - 877 - 632 - 5438 Phone: 1 - 559 - 842 - 1500 Fax: 1 - 559 - 842 - 1520 info@MECawp.com...

  • Page 3: Table Of Contents

    Service Introduction ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ Section 1 - MEC Operator Policy ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ MEC Operator Polcy ������ ������ ������...
  • Page 4 Aprl 2019 Section 14 - Fault Codes ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ 36 Fault Codes ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ ������ ������...

  • Page 5: Chapter 1 - Service

    All parts represented here are manufactured and supplied in accordance with MEC quality standards. We recommend that you use genuine MEC parts to ensure proper operation and reliable performance. To obtain maximum benefits from your MEC Aerial Work Platforms, always follow the proper operating and maintenance procedures.

  • Page 6: Section 1 - Mec Operator Policy

    Any procedures not found within this manual must be evaluated by the individual to assure oneself that they are “proper and safe.” Your MEC Aerial Work Platform has been designed, built, and tested to provide many years of safe, dependable service. Only trained, authorized personnel should be allowed to operate or service the machine.

  • Page 7: Section 2 - Safety Symbols & General Safety Tips

    Safety Symbols & General Safety Tips Safety Symbols & General Safety Tips MEC manuals and decals use symbols, colors and signal words to help you recognize important safety, operation and maintenance information. RED and the word DANGER – Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury������...

  • Page 8: Section 3 - Specifications

    Secton 3 - Specfcatons Aprl 2019 Specifications Specifications Working Height* 32 ft 9.45 m Platform Height 26 ft 7.62 m Top Guardrail 90.3 in 2.3 m Stowed Height Rails Folded 78.75 in Platform Floor 47 in 1.2 m Guardrail Height 43.5 in 1.1 m Toeboard Height...

  • Page 9: Section 4 - Torque Specifications

    Secton 4 - Torque Specfcatons Aprl 2019 Bolt Torque Specification - American Standard Bolt Torque Specification - American Standard Fasteners Use the following values to apply torque unless a specific torque value is called out for the part being used. American Standard Cap Screws SAE Grade Cap Screw...

  • Page 10: Bolt Torque SpecFCatOn - MetrC Standard

    Secton 4 - Torque Specfcatons Aprl 2019 Bolt Torque Specification - Metric Standard Fasteners Use the following values to apply torque unless a specific torque value is called out for the part being used Metric Cap Screws Metric Grade 8������ 8 10������...

  • Page 11: HydraulC Components Torque Table

    Secton 4 - Torque Specfcatons Aprl 2019 Hydraulic Components Torque Table Note:Always lubricate threads with clean hydraulic fluid prior to installation. Use the following values to torque hydraulic components when a specific value is not available. Always check for torque values in the following places before relying on the Hydraulic Components Torque Table.

  • Page 12: Section 5 - Maintenance Lock

    DO NOT engage the Maintenance Lock unless the platform in empty of tools and material������ For the Micro 26, the Maintenance Lock is located at the front of the scissor stack. Raise the platform approximately 10 ft (3 m) just high enough to rotate the Maintenance Lock into place.
  • Page 13 Secton 5 - Mantenance Lock Aprl 2019 Keep clear of the scissor linkage when lowering. If a Maintenance Lock requires adjustment to stow it correctly, stop the lowering function. Adjust the maintenance lock while stationary, then return to the lowering function. Stowed Maintenance Locks ART_5147...

  • Page 14: Section 6 - Hydraulic, Electrical, And Total Systems

    Secton 6 - Hydraulc, Electrcal, and Total Systems Aprl 2019 Hydraulic, Electrical, and Total Systems Hydraulic, Electrical, and Total Systems Hydraulic System HYDRAULIC FLUID UNDER PRESSURE CAN PENETRATE AND BURN SKIN, DAMAGE EYES, AND MAY CAUSE SERIOUS INJURY, BLINDNESS, AND EVEN DEATH������ CORRECT LEAKS IMMEDIATELY������ HYDRAULIC FLUID LEAKS UNDER PRESSURE MAY NOT ALWAYS BE VISIBLE������...

  • Page 15: Component LocatOns

    Secton 7 - Components Locatons Aprl 2019 Component Locations Component Locations Manuals Case Platform Controls Lanyard Anchorage Guard Rails Deck Extension Release Entry Gate Deck Extension Main Platform Hydraulic Manifold Breather Cap Controls Tray Lift Cylinders Hydraulic Filter Maintenance Hydraulic Lock Reservoir Hydraulic...

  • Page 16: Emergency Systems And Procedures

    Secton 8 - Emergency Systems and Procedures Aprl 2019 Emergency Systems and Procedures Emergency Systems and Procedures IF THE CONTROL SYSTEM FAILS WHILE THE PLATFORM IS ELEVATED, USE THE EMERGENCY LOWERING PROCEDURE TO SAFELY LOWER THE PLATFORM������ DO NOT CLIMB DOWN THE ELEVATING ASSEMBLY OR EXIT THE PLATFORM������...

  • Page 17: Section 9 - Transporting And Lifting Instructions

    MEC machinery������ Truck drivers are responsible for loading and securing machines, and should be properly trained and authorized to operate MEC machinery������ Drivers are also responsible for selecting the correct and appropriate trailer according to government regulations and company policy������ Drivers must ensure that the vehicle and chains are strong enough to hold the weight of the machine (see the serial number plate for machine weight)������...

  • Page 18: DrVNg Or WNchNg Onto Or Off Of A Transport VehCle

    Secton 9 - Transportng and Lftng Instructons Aprl 2019 Driving or Winching onto or off of a Transport Vehicle Always attach the machine to a winch when loading or unloading from a truck or trailer by driving������ Read and understand all safety, control, and operating information found on the machine and in this manual before operating the machine������...

  • Page 19: SecurNg To Truck Or TraLer For Transport

    Secton 9 - Transportng and Lftng Instructons Aprl 2019 Securing to Truck or Trailer for Transport Turn the Key Switch to OFF and remove the key before transport. Inspect the entire machine for loose or unsecured items. Chock the wheels Use the tie-down points on the chassis for anchoring down to the transport surface.

  • Page 20: LFtNg InstructOns

    Attach rigging to the designated lift points only. Adjust the rigging to prevent damage to the machine and to keep the machine level. Model X Axis Y Axis 27.5 in 27.2 in Micro 26 70 cm 69 cm Chassis Chassis Lifting Lifting...

  • Page 21: LFt And Support The MachNe

    Secton 9 - Transportng and Lftng Instructons Aprl 2019 Lift and Support the Machine DEATH OR SERIOUS PERSONAL INJURY MAY RESULT FROM THE USE OF SUBSTANDARD LIFTING DEVICES AND/OR JACK STANDS������ ENSURE THAT ALL LIFTING DEVICES AND JACK STANDS ARE OF ADEQUATE CAPACITY AND IN GOOD WORKING CONDITION BEFORE USE������...

  • Page 22: Section 10 - Calibration Instructions

    Secton 10 - Calbraton Instructons Aprl 2019 Calibration Instructions Calibration Instructions The Platform Overload Sensing System may require calibration in the event of a malfunction or after the replacement of an Overload System component. Proper and correct calibration of the Overload system is critical for normal and trouble-free machine operation.
  • Page 23 Secton 10 - Calbraton Instructons Aprl 2019 Note: If a safety concern arises anytime during the automated lift/lower sequence, press the Emergency Stop switch immediately. The procedure can be restarted once the it is safe to do Empty Platform Sequence Park the machine on flat level surface.

  • Page 24: General MachNe MaNtenance

    Secton 11 - Mantenance Aprl 2019 General Machine Maintenance General Machine Maintenance Instructions in this portion of the manual are to be used in conjunction with the Pre-Start, Frequent and Annual Inspection checklists found in this machine’s Operator’s Manual. Important: Scheduled maintenance inspection checklists are included in the Operator’s Manual for use only by qualified service technicians.
  • Page 25 Secton 11 - Mantenance Aprl 2019 Pre-Start Inspection Checklist Items on this checklist should be inspected before each work shift. A copy of this checklist is available in the notes section of this manual. Photocopy the Pre-Start Inspection Checklist to keep record of this inspection.
  • Page 26 Secton 11 - Mantenance Aprl 2019 Steering Yokes Regular application of lubrication to the steer yokes is essential to good machine performance and service life. Continued use of an insufficiently greased steer yoke will result in component damage. Open the steer yoke cover. No zerk fittings.
  • Page 27 Note:For best results, use an extension cord of adequate size with a length no longer than 50 ft / 15m. If you have any further questions regarding the battery charger operation, please contact the MEC Technical Support. Electrical Wiring Maintaining electrical wiring in good condition is essential to safe operation and good machine performance.
  • Page 28 Secton 11 - Mantenance Aprl 2019 Inspect the following areas for burnt, chafed, corroded and loose wires: • Ground control panel • Control Module • Battery Module • Platform controls • Scissor control cable Turn the key switch to ground control and turn the red Emergency Stop button clockwise to the on position at both the ground and platform controls Set the Maintenance Locks (see the Introduction portion of this manual).
  • Page 29 Secton 11 - Mantenance Aprl 2019 Turn the key switch to ground control and turn the red Emergency Stop button clockwise to the on position at both the ground and platform controls. Push in the red Emergency Stop button at the ground controls to the off position. •...
  • Page 30 Secton 11 - Mantenance Aprl 2019 Mark a test line on the ground for reference. Turn the key switch to platform control and turn the red Emergency Stop button clockwise to the on position at both the ground and platform controls. Press the drive select button.
  • Page 31 Secton 11 - Mantenance Aprl 2019 Press the lift function select button. Press and hold the function enable switch on the joystick. Raise the platform approximately 10 ft /3 m from the ground. Press the drive function select button. Choose a point on the machine; i.e., contact patch of a tire, as a visual reference for use when crossing the start and finish lines.
  • Page 32 Secton 11 - Mantenance Aprl 2019 Limit Switches Maintaining the limit switches is essential to safe operation and Down Limit good machine performance. Operating the machine with a faulty Switch limit switch could result in reduced machine performance and a Up Limit Switch potentially unsafe operating condition.
  • Page 33 Secton 11 - Mantenance Aprl 2019 • Result: The diagnostic display does not show code 18 and the alarm does not sound. Replace the Down Limit Switch. Raise the platform until the pothole guards are deployed. • Result: The diagnostic display does not show code 18 and the alarm does not sound. The machine is functioning properly.
  • Page 34 Secton 11 - Mantenance Aprl 2019 Move the machine onto a grade which exceeds the rating of the level sensor. Refer to the Machine Specifications in the Introduction portion of this manual. Press the lift function select button. Standing on the up-hill side of the machine, attempt to raise the platform to approximately 6.6 ft / 2 m.
  • Page 35 Secton 11 - Mantenance Aprl 2019 listed on the Annual Inspection Report. See specific instructions below. Scissor Slide Blocks Maintaining the condition of the scissor arm slide blocks is essential to safe machine operation. Continued use of worn out wear pads may result in component damage and unsafe operating conditions.
  • Page 36 Secton 11 - Mantenance Aprl 2019 Replacement or testing of the hydraulic oil is essential for good machine performance and service life. Dirty oil may cause the machine to perform poorly and continued use may cause component damage. Extremely dirty conditions may require oil changes to be performed more often. Before replacing the hydraulic oil, the oil may be tested by an oil distributor for specific levels of contamination and additive breakdown to verify that changing the oil is necessary.

  • Page 37: LubrCatOn

    Secton 11 - Mantenance Aprl 2019 1930 2632 Lubrication 3346 Operator may perform routine maintenance only. Lubrication listed as Scheduled Maintenance must 4046 be performed by a qualified service technician. 4555 FULL Controls Controls Tray Breather Cap Tray Hydraulic Hydraulic Filter Filter Hydraulic...

  • Page 38: Control Component LocatOns

    Secton 12 - Control Components Aprl 2019 Control Component Locations Control Component Locations Platform Controls / PCU Controls Tray Hour Meter Lift Cylinders Functions Manifold Hydraulic Reservoir Hydraulic Pump & Motor Main Power Switch Battery Tray Battery Charger Lower Controls Batteries ART_5125a Page 34...

  • Page 39: Section 13 - Battery Charger

    Secton 13 - Battery Charger Aprl 2019 Battery Charger Battery Charger ART_5485 The LED display shows 50%, 80% and 100% of battery capacity. When battery capacity is less than the LED marker, the display will blink. The display lights up when capacity has reached the marker level.

  • Page 40: Section 14 - Fault Codes

    Secton 14 - Fault Codes Aprl 2019 Fault Codes Fault Codes Upper Controls Fault Codes, when present, appear on the LED Indicator at the Upper Controls station. ART_5126 LED Indicator Fault Description Models Solutions 01/10 System Initialization Fault All Models Check the ECU.
  • Page 41 Secton 14 - Fault Codes Aprl 2019 Left Turn Coil Fault All Models Check the left steering solenoid and wiring. General Brake Coil Fault Check the brake module and wiring. • Brakes should be about All Models Check brakes and wiring. 46 ohms Check the battery voltage.
  • Page 42 Limits Fault Check tilt sensor. NOT A FAULT CODE All Models Indicates that key switch is in base controls. OPTION CODES FOR MACHINES Micro 19 1930SE 2632SE 3346SE 4046SE 4555SE Micro 26 Page 38 Mcro 26 - Servce & Parts Manual...
  • Page 43 Secton 14 - Fault Codes Aprl 2019 Failures that do not have a fault code associated: Fault Fault Solutions Check the option code No drive, no alarm, the rest Check the drive speed setting functions all good Check the drive motor and wiring Check the drive motor controller and wiring Check the steering function valve No steering, no alarm, the rest...

  • Page 44: Parameter Adjustment

    PARAMETERS SHOULD BE ADJUSTED ONLY IF THE FUNCTION IS OPERATING OUTSIDE OF MACHINE SPECIFICATIONS, OR IF WRITTEN APPROVAL IS OBTAINED FROM MEC PRIOR TO MAKING THE CHANGE������ The following adjustments are made at the Platform Controls station using the LED Indicator to display the current settings.
  • Page 45 Secton 15 - Parameter Adjustments Aprl 2019 Saving New Values New values must be saved immediately after adjustment. To save new values, press and hold the Horn button for 3 seconds. To operate the machine with new values, press the Emergency ART_5135 Stop button, then rotate it to return to the ON position.
  • Page 46 Secton 15 - Parameter Adjustments Aprl 2019 Low Speed Drive This parameter controls low speed drive when the platform is in the stowed position and Low Speed is selected (turtle icon). Press the Drive Mode Select button. The button will light up, indicating this mode is active.
  • Page 47 Secton 15 - Parameter Adjustments Aprl 2019 Lift Speed This parameter controls the speed at which the platform elevates. 1. Press the Lift Mode Select button. The button will light up, indicating this mode is active. Adjust the speed using the steer left and steer right buttons on top of the Control Handle.

  • Page 48: Section 16 - Schematics

    Secton 16 - Schematcs Aprl 2019 Electrical Schematic Electrical Schematic BK(2) RD(2) FU1 300A 001 RD(14) 001 RD(14) 010-3 RD(14) 010-1 BU/RD(16) 010-3 RD(14) CB 7A 010 BN/GN(16) 010-2 RD/BU(16) 010-4 YE(14) 010-5 RD/BU(16) 010A-2 YE(16) 010A-6 BU/RD(16) 010A-6 RD(16) GND-3 BK(16) GND-10 BK(16) CONTROL+ RD/BU(16)

  • Page 49: ElectrCal ConnectOn DAgram

    Secton 16 - Schematcs Aprl 2019 Electrical Connection Diagram GND-10 BK 8A-2 BN/GN 9B WH/BK B+-A RD 8B BN/RD GND-6 BK Page 45 Mcro 26 - Servce & Parts Manual...

  • Page 50: HydraulC SchematC

    Secton 16 - Schematcs Aprl 2019 Hydraulic Schematic Page 46 Mcro 26 - Servce & Parts Manual...

  • Page 51: Chapter 2 - Parts

    This Parts sections consists of illustrated parts sections and is designed to provide you, the customer, with illustrations and the list of associated parts needed to properly maintain the MEC self-propelled aerial work platform. When used in conjunction with the Service section in this manual and the Operator’s Manual (provided separately), this manual will assist you in making necessary adjustments...

  • Page 52: Section 17 - Chassis

    Secton 17 - Chasss Aprl 2019 Steer Linkage and Wheels Assembly Steer Linkage and Wheels Assembly ILLUSTRATION No. Micro 26 Steer Linkage and Wheels Assembly Art_5466 Page 48 Mcro 26 - Servce & Parts Manual...
  • Page 53 Secton 17 - Chasss Aprl 2019 Item Part Number Description Qty������ 43554 Cover 41794 Screw 43555 Steer Yoke Weldment 43556 Bearing 43557 Washer 43558 Drive Motor Assembly 43559 Motor 43560 Reducer 43561 Brake 43562 Wheel 53184 HHCS M12-1.5 × 30 Serrated Flange 43563 Cotter Pin 41321...

  • Page 54: Pothole ProtectOn Assembly

    Secton 17 - Chasss Aprl 2019 Pothole Protection Assembly ILLUSTRATION No. Micro 26 Pothole Protection Assembly Art_5467 Page 50 Mcro 26 - Servce & Parts Manual...
  • Page 55 Secton 17 - Chasss Aprl 2019 Item Part Number Description Qty������ 43567 Pothole Guard Weldment 41049 Roller 50050 NNYL M12 × 1.75 43568 Bearing 41604 43569 Pothole Hole Pusher Assembly 41222 Bearing 41210 Bearing 41807 Lock Clasp 41041 Linkage Weldment 50005 WSHR M20 Standard Flat 50052...

  • Page 56: Battery Pack Module

    Secton 17 - Chasss Aprl 2019 Battery Pack Module ILLUSTRATION No. Micro 26 Battery Pack Module Art_5468 Page 52 Mcro 26 - Servce & Parts Manual...
  • Page 57 Secton 17 - Chasss Aprl 2019 Item Part Number Description Qty������ 41815 Battery Tray Weldment 41403 Battery- Trojan T125 53055 WSHR M8 Spring Washer 53014 NHEX M08-1.25 41813 Hinge Pin 41037 Bearing 41814 Washer 43574 Circlips 41120 Bumper 53224 THMS M05-0.8 × 12 43575 Threaded Rod 42896...

  • Page 58: Power UnT Module

    Secton 17 - Chasss Aprl 2019 Power Unit Module ILLUSTRATION No. Micro 26 Power Unit Module Art_5469 Page 54 Mcro 26 - Servce & Parts Manual...
  • Page 59 Secton 17 - Chasss Aprl 2019 Item Part Number Description Qty������ 43206 Elbow 43576 Straight Fitting 41077 Filter Assembly 41078 Filter Element 53256 HHCS M06-1.00 × 16 Serrated Flange 43577 Filter Bracket 50568 NNYL M06-1.00 Flange 43578 300A Fuse Assembly 41091 300A Fuse 41092...

  • Page 60: HydraulC Tank Assembly

    Secton 17 - Chasss Aprl 2019 Hydraulic Tank Assembly ILLUSTRATION No. Micro 26 Hydraulic Tank Assembly Art_5470 Page 56 Mcro 26 - Servce & Parts Manual...
  • Page 61 Secton 17 - Chasss Aprl 2019 Item Part Number Description Qty������ 41085 Fitting 53258 WSHR M22 Standard Flat 41082 Breather 41826 Fitting 41825 Suction Pipe 41824 Filter 43583 Tank 41087 Plug 53215 WSHR M13 Standard Flat 41413 41167 Fitting 41166 Fitting Page 57 Mcro 26 - Servce &...

  • Page 62: Motor Controller Assembly

    Secton 17 - Chasss Aprl 2019 Motor Controller Assembly ILLUSTRATION No. Micro 26 Motor Controller Assembly Art_5471 Page 58 Mcro 26 - Servce & Parts Manual...
  • Page 63 Secton 17 - Chasss Aprl 2019 Item Part Number Description Qty������ 43584 Mounting Plate 50000 WSHR M06 Standard Flat 53046 WSHR M06 Spring Washer 50028 HHCS M06-1.00 × 20 41093 Motor Controller 41094 Brake Module 50284 WSHR M04 Standard Flat 53062 WSHR M04 Spring Washer 53259...

  • Page 64: Rear Wheel And Ladder

    Secton 17 - Chasss Aprl 2019 Rear Wheel and Ladder ILLUSTRATION No. Micro 26 Rear Wheel and Ladder Art_5472 Page 60 Mcro 26 - Servce & Parts Manual...
  • Page 65 Secton 17 - Chasss Aprl 2019 Item Part Number Description Qty������ 43562 Wheel 53184 HHCS M12-1.5 × 30 Serrated Flange 41328 53282 CSCS M08-1.25 × 20 41025 Bearing Seat 41002 Spacer 43585 Cotter Pin 43586 Spindle 43587 Ladder 50429 HHCS M10-1.50 × 25 Serrated Flange 41003 Ground Strap 53260...

  • Page 66: Charger Assembly

    Secton 17 - Chasss Aprl 2019 Charger Assembly ILLUSTRATION No. Micro 26 Charger Assembly Art_5473 Page 62 Mcro 26 - Servce & Parts Manual...
  • Page 67 Secton 17 - Chasss Aprl 2019 Item Part Number Description Qty������ 43589 Charger 43590 Charger Bracket Weldment 53263 THMS M04-0.70 × 8 41575 Plug 53221 CSCS M04-0.7 × 16 43591 Plug Bracket 50568 NNYL M06-1.00 Flange 50284 WSHR M04 Standard Flat 50285 NNYL M04 ×...

  • Page 68: Ground Control And LMT SwTch

    Secton 17 - Chasss Aprl 2019 Ground Control and Limit Switch 17 16 15 ILLUSTRATION No. Micro 26 Ground Control and Limit Switch Art_5474 Page 64 Mcro 26 - Servce & Parts Manual...
  • Page 69 Secton 17 - Chasss Aprl 2019 Item Part Number Description Qty������ 41098 Tilt Sensor 53173 SHCS M05-0.8 × 10 53043 WSHR M5 Spring Washer 53038 WSHR M05 Standard Flat 41829 Cover 53223 THMS M05-0.8 × 16 41309 Beacon Cover 41310 Beacon 43592 Frame Weldment...

  • Page 70: Ground Control Assembly

    Secton 17 - Chasss Aprl 2019 Ground Control Assembly ILLUSTRATION No. Micro 26 Ground Control Assembly Art_5475 Page 66 Mcro 26 - Servce & Parts Manual...
  • Page 71 Secton 17 - Chasss Aprl 2019 Item Part Number Description Qty������ 41423 Ground Control Panel 41418 Key Switch 43100 41419 Toggle Switch 41420 Circuit Breaker 41334 Relay 41421 Indicator 43097 Base With 1 NC Contact 43098 Red Mushroom Head 41631 Decal, Ground Control Panel Page 67 Mcro 26 - Servce &...

  • Page 72: Section 18 - Scissor

    Secton 18 - Scssor Aprl 2019 Scissor Assembly Scissor Assembly ILLUSTRATION No. Micro 26 Scissor Assembly Art_5476 Page 68 Mcro 26 - Servce & Parts Manual...
  • Page 73 Secton 18 - Scssor Aprl 2019 Item Part Number Description Qty������ 53267 HHCS M10-1.50 × 110 Flange 43595 Cable Bridge 50022 HHCS M10-1.50 × 70 50049 NNYL M10 × 1.50 43596 Cable Bridge 43597 Circlips Upper Lift Cylinder Assembly (Refer To Page 80) 41686 43598 Inner Arm 3...

  • Page 74: Section 19 - Platform

    Secton 19 - Platform Aprl 2019 Main Platform Assembly Main Platform Assembly ILLUSTRATION No. Micro 26 Main Platform Assembly Art_5477 Page 70 Mcro 26 - Servce & Parts Manual...
  • Page 75 Secton 19 - Platform Aprl 2019 Item Part Number Description Qty������ 43610 Upper Main Rail, Left 43611 Lower Main Rail, Right 43612 Upper Main Rail, Right 41357 Inserted Pin 43301 Rivet 41128 Hinge B 53273 HHCS M06-1.00 × 14 Serrated Flange 41127 Hinge A 43337...

  • Page 76: Platform ExtensOn Assembly

    Secton 19 - Platform Aprl 2019 Platform Extension Assembly ILLUSTRATION No. Micro 26 Platform Extension Assembly Art_5478 Page 72 Mcro 26 - Servce & Parts Manual...
  • Page 77 Secton 19 - Platform Aprl 2019 Item Part Number Description Qty������ 41623 Upper Extension Rail, Left 53281 NNYL M05-0.80 Flange 43319 Manual Box 41627 Front Rail 53248 CARB M08-1.25 × 45 Platform Control Box Assembly (Refer To Page 76) 41764 Platform Control Box Mount Bracket 42500 Locating Plate...

  • Page 78: Platform LockNg DevCe Assembly

    Secton 19 - Platform Aprl 2019 Platform Locking Device Assembly ILLUSTRATION No. Micro 26 Platform Locking Device Assembly Art_5479 Page 74 Mcro 26 - Servce & Parts Manual...
  • Page 79 Secton 19 - Platform Aprl 2019 Item Part Number Description Qty������ 50049 NNYL M10 × 1.50 50002 WSHR M10 Standard Flat 41143 Foot Pedal 41144 Lock Pin Housing 41145 Spring 41146 Lock Pin 41147 Bracket 50020 HHCS M10-1.50 × 50 Page 75 Mcro 26 - Servce &...

  • Page 80: Platform Control Box Assembly

    Secton 19 - Platform Aprl 2019 Platform Control Box Assembly ILLUSTRATION No. Micro 26 Platform Control Box Assembly Art_5480 Page 76 Mcro 26 - Servce & Parts Manual...
  • Page 81 Secton 19 - Platform Aprl 2019 Item Part Number Description Qty������ 41632 Decal, Platform Control Panel 41149 Joystick 43621 Function Enable Switch 41150 Joystick Cover 43622 Joystick Steer Switch 43623 Switch Boot 41152 Coil Cord 43624 Housing 43625 Male Insert 43626 Male Contacts 43627...

  • Page 82: Lower LFt CylNder Assembly

    Secton 20 - Hydraulc System Aprl 2019 Lower Lift Cylinder Assembly Lower Lift Cylinder Assembly ILLUSTRATION No. Micro 26 Lower Lift Cylinder Assembly Art_5481 Page 78 Mcro 26 - Servce & Parts Manual...
  • Page 83 Secton 20 - Hydraulc System Aprl 2019 Item Part Number Description Qty������ 43636 Lower Lift Cylinder 42480 Plug 43637 Orifice 42821 Plug 43369 Check Valve 43638 Straight Fitting 43639 Elbow 43640 Tee Fitting 41162 Lowering Knob 41832 Emergency Down Cable Assembly 50423 SHCS M04-0.7 ×...

  • Page 84: Upper LFt CylNder Assembly

    Secton 20 - Hydraulc System Aprl 2019 Upper Lift Cylinder Assembly ILLUSTRATION No. Micro 26 Upper Lift Cylinder Assembly Art_5482 Page 80 Mcro 26 - Servce & Parts Manual...
  • Page 85 Secton 20 - Hydraulc System Aprl 2019 Item Part Number Description Qty������ 43641 Upper Lift Cylinder 41169 Relief Valve 42480 Plug 43638 Straight Fitting 42795 43467 Coil 43372 Solenoid Valve Spool 43369 Check Valve 43374 Orifice 42821 Plug 41413 41166 Fitting 43361 Washer...

  • Page 86: FunctOn ManFold

    Secton 20 - Hydraulc System Aprl 2019 Function Manifold ILLUSTRATION No. Micro 26 Function Manifold Art_5483 Page 82 Mcro 26 - Servce & Parts Manual...
  • Page 87 Secton 20 - Hydraulc System Aprl 2019 Item Part Number Description Qty������ 41549 Relief Valve 41547 Valve Body 43643 Plug 43465 Plug 43206 Elbow 43582 Straight Fitting 42480 Plug 43644 Straight Fitting 43076 Straight Fitting 43645 Orifice 41537 Solenoid Valve Spool 43467 Coil 42795...

  • Page 88: HydraulC Hoses And FTtNgs

    Secton 20 - Hydraulc System Aprl 2019 Hydraulic Hoses and Fittings Steer cylinder Function manifold Hose Assembly Adapter Union ILLUSTRATION No. Micro 26 Hydraulic Hoses and Fittings Art_5497 Page 84 Mcro 26 - Servce & Parts Manual...
  • Page 89 Secton 20 - Hydraulc System Aprl 2019 Item Part Number Description Qty������ 41839 Hose Assembly 43709 Hose Assembly 41840 Hose Assembly 41842 Hose Assembly 43710 Hose Assembly 41180 Hose Assembly 43711 Hose Assembly 43076 Straight Fitting 43582 Straight Fitting 43644 Straight Fitting 43576 Straight Fitting...
  • Page 90 Module (Pothole) Tilt Alarm Sensor Beacon Ground Control Assembly Coil Controller Charger Fuse Assembly Motor DC Contactor Battery Motor Motor Controller Motor Power Switch ILLUSTRATION No. Micro 26 Electrical Harness Art_5498 Page 86 Mcro 26 - Servce & Parts Manual...
  • Page 91 Secton 21 - Electrcal System Aprl 2019 Item Part Number Description Qty������ 43713 ECU Harness 43646 Limit Switch Harness 43714 Angle Pressure Sensors Harness 41876 Communications Harness 41863 Ground Control Panel Harness 43715 Pump Motor Positive Harness 43716 Drive Motor Harness 43717 Pump Motor Negative Harness 41855...

  • Page 92: Power To Platform

    Secton 21 - Electrcal System Aprl 2019 Power to Platform ILLUSTRATION No. Micro 26 Power to Platform Art_5499 Page 88 Mcro 26 - Servce & Parts Manual...
  • Page 93 Secton 21 - Electrcal System Aprl 2019 Item Part Number Description Qty������ AC Plug (Refer To Page 62) 43721 Wire Cable, Platform AC Power 91598 Cover, Outlet Box 92007 Outlet, 15A 120V GFCI 91597 Outlet Box 53040 HHSM M08- 15 x 1/2” 92008 Strain Relief .50”...

  • Page 94: Section 22 - Decals

    Secton 22 - Decals Aprl 2019 Decal Locations Decal Locations Opposite side also Page 90 Mcro 26 - Servce & Parts Manual...
  • Page 95 Secton 22 - Decals Aprl 2019 P/N - 42542 4 x 18 in P/N - 41646 P/N - 41748 Qty. - 2 P/N - 94114 Qty. - 3 Qty. - 3 Qty. - 2 P/N - 94949 P/N - 41641 P/N - 41666 P/N - 41642 Qty.
  • Page 96 Decal, Tip Over Hazard 94659 Decal, Battery Charger & Power To Platform 94115 Decal, MEC Oval, Small 42541 Platform Decal - Micro 26 (Indoor Only Rated) 41635 Decal Instructions - Tie Down Point 41634 Decal Instructions - Lift Point 41631...
  • Page 97 Secton 20 - Hydraulc System Aprl 2019 Notes Page 93 Mcro 26 - Servce & Parts Manual...
  • Page 98 MEC Parts Order Form Phone: 559-842-1523 Fax: 559-400-6723 Email: Parts@mecawp������ c om Please fill out completely Date: Ordered By: Account: Your Fax No.: Ship to: Bill to: Purchase Order Number Ship VIA ** All orders MUST have a Purchase Order Number...
  • Page 99 MEC Aerial Platform Sales Corp. and is found upon inspection by MEC Aerial Platform Sales Corp. to be defective in material and/or workmanship. MEC Aerial Platform Sales Corp. shall not be liable for any consequential, incidental or contingent damages whatsoever.
  • Page 100 MEC Aerial Work Platforms 1401 S. Madera Avenue, Kerman, CA 93630 USA Toll Free: 1 - 877 - 632 - 5438 Phone: 1 - 559 - 842 - 1500 Fax: 1 - 559 - 842 - 1520 info@MECawp.com www.MECawp.com...

Table of Contents

Save PDF