Platform Control Operation And Test - Mec Crossover Series Operator's Manual

Crossover Series
ART_3822

Platform Control Operation and Test

Entering The Platform
ART_3831
Page 14
June 1, 2012
Lift/Lower
• Press and hold the Lift/Lower switch on the base control panel to lift or lower
the platform.
Test Operation
• Raise the platform until it stops. Platform should lift to full height.
• Lower the platform until it stops. Scissor assembly should close completely.
• Releasing the switch will stop Lift/Lower function.
• Pressing the Emergency Stop Switch will stop lift/lower function.
Personnel shall enter and exit the platform only at the Personnel Entry Gate.
Check that it is properly secured before operation.
Operating Instructions & Function Tests
92555
Crossover Series