Lower Controls - Mec Crossover Series Operator's Manual

Crossover Series

Lower Controls

ALWAYS be aware of the machine's position and of your surroundings
before activating any control function.
CONTROL DESCRIPTION
1 Battery Charge Indicated the state of the battery charge.
Indicator
2 Circuit Breaker Trips when there is excessive electrical load. Push to reset.
3 Selector Switch PLATFORM
BASE
OFF
4 Emergency Stop Press the EMERGENCY STOP switch at any time to stop all machine functions.
Switch Turn switch clockwise to reset
5 Hour Meter Indicates total elapsed time of machine operation.
6 Platform With the Selector Switch in the BASE position, move this switch up to lift the platform or down to lower
Lift/Lower Switch the platform.
7 Emergency Down Move this switch down to lower the platform in the event of an emergency or power loss.
Switch
92555
Crossover Series
1 2
5
Select to operate from the platform control panel.
Select to operate from the base control panel.
Select to stop operation from either control panel.
3 4
6 7
Controls & Components
ART_3813
Page 9
June 1, 2012