Controls & Components; Platform Controls - Mec Crossover Series Operator's Manual

Crossover Series
Controls & Components

Platform Controls

ALWAYS be aware of the machine's position and of your surroundings
before activating any control function.
CONTROL
1 Speed/Torque
Selector Switch
2 Tilt Indicator Light
3 Lift/Drive Switch
4 Emergency Stop Switch
5 On/Off Switch
6 Horn Button (Option)
7 Steer Switch
8 Control Handle
9 Enable Bar
10 Drive Enable Indicator
(Outrigger Option)
11 Extend/Retract
(Outrigger Option)
Page 8
June 1, 2012
1
2
3
7
8
9
DESCRIPTION
Move this switch to the up for high speed drive. Push this switch to down for high torque drive.
If illuminated, the machine is not level. Carefully lower the platform, then move the machine to a firm,
level surface.
Move this switch UP to enable the Lift function. Move this switch DOWN to enable the Drive function.
Press the EMERGENCY STOP switch at any time to stop all machine functions.
Turn switch clockwise to reset
This switch turns power ON or OFF at the platform (does not affect the Lower Controls)
Press to sound warning horn.
Using your thumb, press and hold the rocker switch to steer Left or Right.
DRIVE Proportionally controls Forward and Reverse travel.
LIFT Proportionally controls Lift and Lower functions.
Squeeze to enable DRIVE, STEER, and LIFT functions from the Joystick.
Lamp ON Outriggers are retracted and machine will drive.
Lamp OFF Outriggers are extended and machine will not drive.
Push the toggle switch DOWN to extend the outriggers. Continue pushing down until the outriggers
stop automatically. Push the toggle switch UP to retract the outriggers.
Controls & Components
4
5
6
10
11
ART_3814
Crossover Series
92555