Beckman Coulter Airfuge Instructions For Use Manual page 12

Illustrations
xii
Illustrations
1.1 The Airfuge
1.2 Bottom
1.3 Cross-section View of the
1.4 Rear View, 1-4
1.5 Airfuge Components and
2.1 Filter Installation, 2-3
2.2 Aligning the Brake Pin in the Stator: The slot on the end of the
pin straddles the brake spring wire. The broken line shows
the wire direction (aligned with the screws). If the tip of the
pin slot stands on the wire instead of straddling it, the pin
will be too high above the
2.3 Cold Room
3.1 Worn and New Stator
5.1 Prying Up the
5.2 Lifting Out the Stator. Keep the stator level to prevent
binding., 5-4
5.3 Stator O-Ring
5.4 Reassembling the Stator and
5.5 Location of the Brake Spring Wire from the Ultracentrifuge
Bottom, 5-8
5.6 Location of Rear
5.7 Location of Time-Delay
Ultracentrifuge, 1-1
Panel, 1-3
Airfuge, 1-4
Accessories, 1-5
stator., 2-5
Setup, 2-7
Pads, 3-3
Stator, 5-3
Positions, 5-4
Pin, 5-5
Controls, 5-9
Knob, 5-11