Thermo Scientific Vanquish VC-D40 Operating Manual page 80

6 • Operation
LED Bar
STATUS LED
Page 80
The LED bar provides the information when the device is closed. When
the device is connected in the Chromeleon software, the LED bar may
provide less information.
LED Bar
Off (dark)
Dimmed
Yellow, flashing slowly
Yellow
Green, flashing
Green
Blue, running
Blue
Red
The STATUS LED on the keypad inside the device provides the following
information:
STATUS LED Description
Off (dark) The power to the device is turned off.
Green The device is functioning properly.
Red A problem or error has occurred. For the related message, check
the Chromeleon Audit Trail. For remedial action, see
Troubleshooting
For information about the LEDs that are present next to the UV and VIS
buttons on the keypad, see
Description
The power to the device is turned off.
The doors of the device are open.
The power to the device is turned on, but the device
is not connected in the Chromeleon software.
The device is connected in the Chromeleon
software, but the device is not equilibrated.
The device is equilibrating. At least one lamp is
igniting.
The device is connected and equilibrated, but no
data acquisition is running. At least one lamp is
turned on.
A data acquisition is running.
An injection or sequence is running.
A problem or error has occurred. For the related
message, check the Chromeleon Audit Trail. For
remedial action, see Troubleshooting
(} page 137).
Keypad (} page 78).
Variable Wavelength Detectors (VC-D40, VF-D40)
(} page 137).
Operating Manual