Replacing The Intake Air Line; Replacing The Rubber Piping Related Oil Separator; Replacing The Intake Hose And Intercooler Hose; Replacing The Egr Cooler Hose - Kubota R430 Operator's Manual

BIENNIAL SERVICING

3. Replacing the intake air line

1. Replace the hoses and clamps, if necessary.
(See Checking the fuel line and the intake air line
on page 78)
(1) Hoses
4. Replacing the rubber piping
related oil separator
• Consult your local KUBOTA dealer for replacing the
rubber-piping-related-oil-separator.
5. Replacing the intake hose and
intercooler hose
• Consult your local KUBOTA dealer for replacing the
intake hose and intercooler hose.

6. Replacing the EGR cooler hose

• Consult your local KUBOTA dealer for replacing the
EGR-cooler-hose.
7. Replacing the radiator hoses
(water pipes)
1. Replace the radiator hoses and the clips.
(See Checking the radiator hoses and the clips on
page 77)
R430
(2) Hose clamps
(1) Radiator hose

SERVICE AS REQUIRED

1. Replacing and repairing the
electrical system
Damage to cables and loose connections of the
electrical system cause malfunctioning and lead to
short circuits, leakage, and fires.
1. Replace and repair the electrical system as quickly
as possible if necessary.

1.1 Replacing the fuses

WARNING
To avoid personal injury or death:
• Before replacing a fuse, be sure to turn off the
starter switch.
1. Remove the cover of the fuse box.
2. Replace the blown fuse using a new one of the
same capacity.
Fuse capacities and their circuits are as follows.
(1) Fuse box A
PERIODIC SERVICE
(2) Clip
(2) Fuse box B
87