Table of Contents
Advertisement
RECOMMENDED OIL LIST
RECOMMENDED OILS
RECOMMENDED OIL LIST
IMPORTANT :
• Before delivery, the hydraulic oil used is JXTG Nippon Oil and Energy Diesel DH-1/CF.
• Use the engine oil of API service classification CJ-4.
• Use SAE 80W (API, GL-4, GL-5) as drive unit oil for all seasons.
Gear oil
All-weather gear oil
In winter or by low temperatures
Hydraulic oil
In summer or by high ambient tempera-
tures
Grease
Fuel
Fuel under -5 ℃
NOTE :
• Engine oil
– Use the engine oil of suitable American-petroleum-institute (API) service classification and with
proper SAE-engine-oil-standards according to the ambient temperatures.
Above 25 ℃
0 ℃ to 25 ℃
Below 0 ℃
– See the following table for the suitable API classification engine oil and the fuel.
Fuel used
Ultra Low Sulfur Fuel [＜ 0.0015% (15 ppm)]
• Fuel
– Use the ultra-low-sulfur-diesel-fuel of the following concentrations only for these engines.
Ultra low sulfur diesel fuel
– Cetane number of 45 minimum. Cetane number greater than 50 is preferred, especially for the
following temperatures or elevations.
Temperatures
Elevations
– Diesel fuels specified to the following are recommended.
Diesel fuel
– The following is a distillate fuel of lower volatility for engines in industrial and heavy mobile service
(SAE J313 JUN87).
Distillate fuel
R430
Application
SAE 30 or SAE 10W-30, SAE 15W-40
SAE 20 or SAE 10W-30, SAE 15W-40
SAE 10W or SAE 10W-30, SAE 15W-40
Viscosity
SAE 80W
Shell Donax TD
SAE 5W-30
SAE 10W-30
SAE 10W-30
SAE 15W-40
Shell Alvania EP2
Engine oil classification (API classification)
Oil class of engines except external DPF
CJ-4
Below 0.0015% (15 ppm)
Below -20 ℃
Above 1500 m
EN 590 or ASTM D975
No. 2-D
RECOMMENDED OILS
Shell
ExxonMobil
Mobilux EP2
Diesel Fuel No.2-D S15
Diesel Fuel No.1-D S15
95
Advertisement
Table of Contents
