Kubota R430 Operator's Manual page 74

PERIODIC SERVICE
(1) Lift arm attachment pin (2
places)
(2) Quick coupler pin (2 places)
(3) Bucket link pin (1 place)
(4) Bell crank arm pin (3 places)
(5) Bucket cylinder bottom pin (1
place)
Greasing the universal joint
1. Apply the grease to the universal joint at three
grease fittings.
(1) Grease fitting
Greasing the rear frame
1. Apply the grease to the rear frame at one grease
fitting.
(1) Grease fitting
70
(6) Lift cylinder rod pin (2 pla-
ces)
(7) Lift cylinder bottom pin (2
places)
Greasing the articulation joint
1. Apply the grease to the articulation joint at one
grease fitting.
(1) Grease fitting
Greasing the steering cylinder bearing
1. Apply the grease to the steering-cylinder-bearing at
the two grease fittings.
(1) Grease fitting
DAILY CHECK
R430