Checking The Fuel Line And The Intake Air Line; Checking The Wheel Bolts; Cleaning The Air Cleaner Element - Kubota R430 Operator's Manual

Wheel loader
Table of Contents

Advertisement

 PERIODIC SERVICE
5. Reassemble the outer-filter-element and the engine
cover.
During reassembly, take care to install the engine
cover so that its "TOP" mark (arrow) faces upwards.
(1) Outer filter element
(2) Inner element
(3) Case
IMPORTANT :
• If you use the machine in an excessively
dusty environment, inspect and clean /
replace the air-cleaner-elements more often
than
indicated
INTERVALS on page 63.
• The air-cleaner-elements are dry elements.
Do not oil the air-cleaner-elements.
• Do not operate the machine without the air
cleaner installed.
4. Checking the fuel line and the
intake air line
1. Check to see that all lines and hose clamps are
tight and not damaged.
2. If hoses and hose clamps are found worn or
damaged, replace or repair them at once.
78
(4) Cover
in
MAINTENANCE
SERVICE EVERY 200 HOURS
(1) Hose

5. Checking the wheel bolts

1. Check the wheel bolts according to Changing the
tires on page 92.
(1) Wheel bolt
Tightening
Wheel bolt (1)
torque

6. Cleaning the air cleaner element

WARNING
To avoid personal injury or death:
• Wear the eye protectors when cleaning with
compressed air.
(2) Hose clamp
275 N⋅m to 314 N⋅m
(28 kgf⋅m to 32 kgf⋅m)
R430

Advertisement

Table of Contents
loading

Table of Contents