Table of Contents
Advertisement
CHECKS BEFORE STARTING THE MACHINE
8. Set the minute.
• Press the user-setting-switch and the numeric
setting will be smaller.
• Press
the
display-selector-switch
numeric setting will be larger.
(A) Blinking
User setting switch
50
49
48
If you press the display-selector-switch for a long
time, the new settings will be decided.
NOTE :
• If the battery is disconnected, the clock-
setting-request-indicator
blink for requesting to set the clock.
CHECKS FOR THE INDICATORS
1. Battery charge indicator
The battery-charge-indicator lights up if the charging
system fails with the engine running.
When the starter switch is turned to [RUN] with the
engine off, the battery-charge-indicator lights up, and
when the engine starts, the battery-charge-indicator
goes out. If the battery-charge-indicator stays on with
the engine running, stop the engine and check the fan
belt.
NOTE :
• If there is disconnection or failure in the
charging system when the starter key is turned
to [RUN], the following symbol will appear.
34
and
the
Display selector switch
50
51
52
(yellow) will
CHECKS FOR THE INDICATORS
(1) Battery charge indicator
2. Engine oil pressure warning
indicator
The engine-oil-pressure-warning-indicator lights up due
to failure of the lubricating system with the engine
running.
When the starter switch is turned to [RUN] with the
engine off, the engine-oil-pressure-warning-indicator
lights up, and when the engine starts, the engine-oil-
pressure-warning-indicator goes out. If the engine-oil-
pressure-warning-indicator stays on with the engine
running, stop the engine and check the level of the
engine oil.
NOTE :
• If there is disconnection, failure or breakdown
in the lubricating system when the starter key is
turned to [RUN], the following symbol will
appear.
(1) Engine oil pressure warning
indicator
3. Grow plug indicator
With the starter key at the [RUN] position, the preheat
status of the engine is indicated.
R430
Advertisement
Table of Contents
