Table of Contents
Advertisement
Selenio™ Network Processor
User Guide
When reboot is complete, a command prompt window opens with a login prompt.
Configuring Host PC VirtualBox NIC
The default IP address for the SNP Manager is 192.168.1.11. In order to reach the SNP Manager
configuration UI, you need to make sure that the IP address of the VirtualBox host-only network adapter
is on the same subnet as the default IP address of the SNP Manager VM.
The following steps describe how to accomplish the above on a Windows PC.
1. Choose Start > Control Panel > Network and Sharing Center.
2. Click Change adapter settings in the panel at the left of the screen.
The Network Connections window opens.
3. Right-click VirtualBox Host-Only Network and select Properties.
4. In the Properties dialog, Select TCP/IPv4 configuration.
5. Configure the VirtualBox Host-only NIC IP address and subnet mask to the default settings:
IP address: 192.168.1.20
Subnet mask: 255.255.255.0
6. Click OK and exit the Configuration window.
At this point, if you open a Command Line window and ping the SNP Manager VM at its default IP, you
should get a response.
© 2019 Imagine Communications Corp.
Proprietary and Confidential.
Getting Started with SNP Manager
May 2019 | Page 43
Advertisement
Table of Contents
