Table of Contents
Advertisement
Selenio™ Network Processor
User Guide
Control Link Configuration
Select Interface
Once you have made a selection, further information appears:
MAC
Current address
Current netmask
Current gateway
New address
New netmask
New gateway
Log Collection
The log file contains debug information in a .tgz file (can be opened by WinZip).
1. To access the Selenio™ Network Processor Console, point the browser to
Note: When connecting to SNP, use Chrome or Firefox. Other browsers, such as Internet Explorer,
Edge, or Safari, are not supported.
2. Click the Collect Logs button to create a log file for download.
3. Click the SNP_logs_<IP Address>.tgz file to download the log, which can be unzipped for viewing.
To view logs for SNP Manager, see
Accessing HTML Help
You can open SNP online help by clicking Help in the top right corner of the SNP Console.
© 2019 Imagine Communications Corp.
Select which of the 1G Management Ethernet ports to use to connect to
SNP Manager.
•
Control A
•
Control B
If no selection is made, SNP will use the first one it finds a signal on.
Displays the MAC address of the selected interface.
Displays the IP address of the selected interface.
Displays the mask of the selected interface.
Displays the gateway of the selected interface.
Enter a new IP address for the device.
Enter a new mask for the selected interface.
Enter a new gateway for the selected interface.
Configuring SNP Manager
Proprietary and Confidential.
Using Selenio™ Network Processor Console
http://<SNP
(on page 65).
ip>.
May 2019 | Page 38
Advertisement
Table of Contents
