Reconfiguring Snp Manager Vm Network Adapter To Connect To The Snp Network - Imagine communications Selenio SNP-GW-3GX32 User Manual

Selenio™ Network Processor
User Guide
The screen updates with the following options:
4. Enter the following information:
▪
Interface IP/Netmask (such as "172.25.2.43/15")
▪
Gateway
5. Press Apply.
The GUI shows the message "IP Change Failed", but this is to be expected. The connection between the
SNP Manager virtual machine and the web browser will be lost because the IP address has changed.
Reconfiguring SNP Manager VM Network Adapter to connect
to the SNP network
1. Do one of the following:
▪
(If the VM is still running) Select Machine > Settings from the menu in the VM window.
▪
(If the VM is not running) In the VirtualBox Manager tool, select the SNP Manager VM and click
Settings from the ribbon at the top of the screen.
2. In the panel at the left of the dialog box, select Network.
3. In the Adapter 1 tab, under Attached to: select Bridged Adapter, and from the Name list, select the
NIC card that the SNP uses to connect to the network.
4. Press OK.
© 2019 Imagine Communications Corp. Proprietary and Confidential.
Getting Started with SNP Manager
May 2019 | Page 46