Table of Contents
Advertisement
Selenio™ Network Processor
User Guide
Servicing
4. Replace the power supply access panel cover.
Ensure that the access panel cover is completely engaged, so the angled lips at the top and bottom hold
the power cords in place.
Main PCB Assembly (170-101712Q0x)
The SNP main board assembly (170-101712Q0x) fits snugly to the left of the power supply.
Removing the Main PCB Assembly
Before removing the main board, you must remove the front panel of the SNP. See
Removing the Front
Panel
(on page 139) for more information. It is not necessary to remove the top of the chassis to remove
the main board, meaning that you can service SNP while the entire unit is rack-mounted.
1. Pressing both sides of the fly-over cable, evenly slide it away from the connector.
Do not pull the fly-over cable cord.
© 2019 Imagine Communications Corp.
Proprietary and Confidential.
May 2019 | Page 145
Advertisement
Table of Contents
